Rated supply voltage (Un): |
24 VAC/DC |
Outputs function: |
3NO+1NC |
Performance Level (PL): |
Up to PL e |
Safety Integrity Level (SIL CL): |
Up to SIL 3 |
Safety Category: |
Up to category 4 |
MTTDd: |
2-channel configuration: 156 years - 1-channel configuration: 77 years |
Diagnostic Coverage (DC): |
2-channel configuration: HIGH - 1-channel configuration: NONE |
Service time: |
20years according to EN ISO 13849-1 |
Conforming to standards: |
EN60947-1, IEC60947-1, EN60947-5-1, IEC60947-5-1, EN60947-5-2, IEC60947-5-2, EN60947-5-3, IEC60947-5 |
Conforming to directive: |
2006/42/CE-Direttiva Macchine e 2014/30/UE-Direttiva CEM |
Approvals: |
EC-Type Examination Certificate n° IMQ CR 475 DM |
Rated supply voltage (Un): |
24 VAC/DC |
LED power supply (PWR): |
RED color - If ON the power supply is present |
Max current for input: |
< 30 mA |
Minimum duration of START impulse: |
< 250 ms |
Activation time: |
< 150 ms |
Releasing time: |
< 15 ms |
Simultaneity time: |
Infinity |
Short circuit protection: |
PTC resistor, Ih=0.5 A |
PTC time: |
Operation for > 100 ms, Reset > 3 s |
CH1 status indicator LED: |
GREEN color -ON STATE if the channel 1 is operating |
CH2 status indicator LED: |
GREEN color -ON STATE if the channel 2 is operating |
Output contacts: |
3 NO safety contacts + 1 NC auxiliary contact |
Output contacts type: |
Forcibly guided |
Output contacts material: |
Gold-flashed Ag-Ni alloy |
Output contacts max. swithing voltage : |
250 VAC, 30 VDC |
Output contacts max. swithing current: |
6:00 AM |
Output contacts free air thermal current : |
6:00 AM |
Output contacts protection fuse: |
6 A tipo F |
Output contacts max. swithing power: |
1500 VA, 180 W |
Output contacts utilization category: |
AC15: Ue=230 V, Ie=3 A - DC13: Ue=24 V, Ie=3 A |
Ambient temperature: |
-25 °C ÷ +55 °C (Operating) / -25 °C ÷ +55 °C (Storage) |
Mechanical endurance: |
>10 million of cycles |
Electrical endurance: |
>100.000 cycles |
Pollution degree: |
3 (external) e 2 (Interno) |
Rated impulse voltage (Uimp): |
4 kV |
Rated insulation voltage (Ui): |
250 V |
Overvoltage category: |
III |
Housing material: |
Polyamide PA66 Vo class according to UL94 |
Protection degree: |
IP40 (outside) e IP20 (inside) |
Cable cross section: |
0.2 ÷ 2.5 mq o 24 ÷ 12 AWG |
Clemp Tightening torque: |
0.5 ÷ 0.6 Nm |
Dimensions: |
22.5 x 99 x 111.5 mm |
Weigth: |
250g |